Welcome to the official website of Guangdong Fangda Hardware Technology Co., Ltd.!

Service Hotline
137-1188-2728

0769-8336-3669

Product center

137-1188-2728   0769-83363669

Fangda Hardware|Dongguan Flat Pad

GB97.5-2002

GB97.5-2002

The flat pad is mainly punched out with iron plate. The shape is generally a flat washer with a hole in the middle. This hole size specification is generally based on customer requirements.

Product material: iron, galvanized, stainless steel (201, 301, 316), copper, aluminum, 65Mn

Applicable industries: hardware industry, electrical industry, electronics industry, toy industry, furniture industry

Implementation standards: national standard GB95-2002/ German standard DIN 125-1-1990/American standard ANSIB 18.22.1-1981/International standard ISO 7089-2000/Japanese standard JIS 1186-1995

Service Hotline
137-1188-2728

Consult now Number

The flat pad is mainly punched out with iron plate. The shape is generally a flat washer with a hole in the middle. This hole size specification is generally based on customer requirements.


Flat washers are usually thin pieces of various shapes used to reduce friction, prevent leakage, isolate, prevent loosening or disperse pressure. This material is found in many materials and structures to perform a variety of similar functions. Due to the material and process limitations of the threaded fasteners, the support surface of the fasteners such as bolts is not large. Therefore, in order to reduce the compressive stress of the pressure receiving surface, the surface of the connected member is protected, and a gasket is used. In order to prevent the looseness of the connecting pair, a loose spring washer and a multi-tooth lock washer, a round nut retaining washer, and a saddle-shaped, wave-shaped, tapered elastic washer are used.


There are 9 standard flat washers in China. From 2000 to 2002, GB/T97.3-2000, GB/T5286-2001, GB/T95-2002, GB/T96.1-2002, GB/T96.2 were approved. -2002, GB/T97.1-2002, GB/T97.2-2002, GB/T97.4-2002 and GB/T5287-2002 and other flat washer standards.


According to the flat washer performance level, I recommend the use of materials:


For the optional 10012 HV grade ST12, ST13 and Q235, Q215, Q195, etc., the surface hardness can reach about 110HV;


For the optional 140HV class 08F, 08Al and 10, 10F, etc., the surface hardness can reach about 140HV;


For the 200HV and 300HV grades, 45, 50, 60, 70 steel or 65Mn steel should be selected, which can be quenched and tempered by heat treatment to achieve the technical requirements of 200-300 HV and 300-400 HV.


For detailed details of the flat pad parameters, please click to click:

Product nameInternational standardExecutive standard
Flat padNational standardGB95-2002
Flat padNational standardGB96.1-2002
Flat padNational standardGB97.1-2002
Flat padNational standardGB97.5-2002
Flat padNational standardGB848-1985 
Flat padNational standardGB5287-1985 
Flat padNational standardGB9074.24-1988
Flat padNational standardGB9074.25-1988
Flat padNational standardDIN 125-1-1990
Flat padNational standardANSIB 18.22.1-1981
Flat padNational standardISO 7089-2000
Flat padNational standardJIS 1186-1995
Flat padNational standardJIS 1258-2006
Recommended Products
Copyright @ 2019 Guangdong Fangda Hardware Technology Co., Ltd. All Right Reserved. All Right Reserved. ICP:粤ICP备19130275号-1
Technical Support:Dongguan website【Dongdian】

Online service

点击这里给我发消息